Power Saving Principle Of Disc Machine

Dec 13, 2022|

Because there is a very violent mutation process in the working process of the disc machine, the impact on the machine is very large, which affects the life of the entire injection molding system. In domestic shoemaking enterprises, there are a large number of old equipment with low degree of automation and high energy consumption. The machine is generally designed according to the maximum production capacity. In fact, it can not use so much power during production. The rotation speed of the oil pump motor remains unchanged, so the output power is almost unchanged. There is a phenomenon that a large horse pulls a small car in production. Therefore, a lot of energy is wasted.
We adopt the frequency conversion operation technology of the disc machine. The frequency converter detects the pressure and flow signals from the computer board of the disc machine in real time. The pressure or flow signals of the disc machine are 0~1A. After internal processing, the disc machine outputs different frequencies and adjusts the motor speed, that is, the output power is automatically tracked and controlled synchronously with the pressure and flow, which is equivalent to that the constant displacement pump has become an energy-saving variable displacement pump. The original liquid pressure system matches the power required for the operation of the whole machine, The loss of high pressure overflow energy of the original system is eliminated. It can greatly reduce the vibration of mold closing and opening, stabilize the production process, improve product quality, reduce mechanical failures, extend the service life of the machine, and save a lot of electric energy. 3、 Features of frequency conversion energy saving
1) Simple operation, synchronous operation with the disc machine, without any adjustment;
2) High reliability: keep the original control mode and oil circuit of the disc machine unchanged; The mains/power saving operation control mode is adopted, so that the production will not be affected in case of failure;
3) Soft start: reduce machine vibration and prolong the service life of equipment and mold; Effectively reduce noise and improve working environment; The heating of the system is obviously reduced, and the oil temperature is stable; Extend the service life of the sealing components, reduce the shutdown maintenance rate, save a lot of maintenance costs, and increase the installed capacity of the transformer;
4) High rate of return: all investment will be recovered through electricity cost saving in about 6-12 months.

Send Inquiry