-

Dec 22, 2022Stability And Electrical Properties Of Pvc
The softening point of PVC resin is low, about 75-80 ℃, and the embrittlement temperature is lower than - 50~- 60 ℃. The long-term use temperature of most products should not exceed 55 ℃, and the s... -

Dec 21, 2022Migration And Weather Resistance Of Pvc
The so-called migration refers to that some soluble dyes or organic pigments existing in the surrounding solvents penetrate into the surface of PVC products through plasticizers, and those dissolve... -

Dec 20, 2022Colorability Of PVC
PVC has poor thermal stability and light resistance. Hydrogen chloride starts to decompose at 150 ℃, and adverse reactions occur with the amount of plasticizer. -

Dec 19, 2022PVC Modification Method
PVC resin is a polar amorphous polymer with a density of 1.38 g/cm3 and a glass transition temperature of 87 ℃. Therefore, it has poor thermal stability and is not easy to process. -

Dec 18, 2022Polymerization Methods Of Pvc
PVC is prepared by free radical addition polymerization. The polymerization methods mainly include suspension polymerization, lotion polymerization and bulk polymerization. Suspension polymerizatio... -

Dec 17, 2022Main Classification Of Pvc
According to the different scope of application, PVC can be divided into: general-purpose PVC resin, high degree of polymerization PVC resin, cross-linked PVC resin. -

Dec 16, 2022History Of Pvc
As early as 1835, polyvinyl chloride was discovered by V. Lenio of the United States. When sunlight was used to irradiate vinyl chloride, it formed a white solid, namely polyvinyl chloride. -

Dec 15, 2022Introduction To PVC
Polyvinyl chloride, abbreviated as PVC in English, is a polymer polymerized by vinyl chloride monomer (VCM) in the presence of peroxide, azo compound and other initiators or under the action of lig... -

Dec 14, 2022Working Principle Of Fully Automatic Disc Type Plastic Injection Molding Machine
The fully automatic disc type plastic injection molding machine of the shoemaking enterprise is a major common equipment in the shoemaking enterprise, known as the electric tiger. -

Dec 13, 2022Power Saving Principle Of Disc Machine
Because there is a very violent mutation process in the working process of the disc machine, the impact on the machine is very large, which affects the life of the entire injection molding system. -

Dec 12, 2022Maintenance Of Forming Machine
Circuit: pay attention to the cleaning of the circuit board, regularly clean the dust of the strong and weak current boxes, keep the box dry and prevent moisture. -

Dec 11, 2022Operation Method Of Forming Machine
Select a flat platform, place the machine stably, and pull the chassis feet apart to make the machine panel easy to observe.

